Strike 90 Grip (AR-15)
about
Strike 90 Grip (AR-15): FFFTech/FFFTechnology
A 0°/90° angled grip designed for CQC. Swells from 22.3mm at the top section, and out to 26mm at the bottom. Has side palm scallops across the bottom-sides of the grip.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
files
| File | Extension |
|---|---|
| Strike 90.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
Strike 90 Grip (AR-15): FFFTech/FFFTechnology
A 0°/90° angled grip designed for CQC. Swells from 22.3mm at the top section, and out to 26mm at the bottom. Has side palm scallops across the bottom-sides of the grip.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
creator
Metrics
Views
1.8K
Project Info
release date
May 15, 2022
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
version hash
QmaitMthpaB1CDSgFFsgmQY5tATAF533W3sxYgxrwU8ejS
files
| File | Extension |
|---|---|
| Strike 90.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
