"Stubbin' " Stubby VFG V1.1.2
about
Stubbin Foregrip V1.1.2: FFFTech/FFFTechnology
A basic stubby foregrip that attaches to a 5+ slotted section of picatinny rail. Two versions of the design are available; Standard (Smooth Grip) & Rib'd (Fo yo pleasure, baby)
Remember, it may be stubby, but it has so much potential. :P
(Insert cringe here.)
Update V1.1.2: Enlarged picatinny rail channel for better fitment, organized files to current 3FTech data pack format, changed print settings for the common used Ender 3 3D printers.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%
No support material is needed.
Hardware Needed:
1x M5x30 Hex Socketed Machine Screw/Bolt
1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)
files
| File | Extension |
|---|---|
| Stubbin Foregrip V1.2.2.zip | zip |
versions
Version: Stubbin Foregrip V1.2.2 latest
Stubbin Foregrip V1.2.2: FFFTech/FFFTechnology
A basic stubby foregrip that attaches to a 5+ slotted section of picatinny rail. Two versions of the design are available; Standard (Smooth Grip) & Rib'd (Fo yo pleasure, baby)
Remember, it may be stubby, but it has so much potential. :P (Insert cringe here.)
Update V1.2.2: Fixed void(s) in STL mesh.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%
No support material is needed.
Hardware Needed:
1x M5x30 Hex Socketed Machine Screw/Bolt
1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)
Version: 1.0.0
about
Stubbin Foregrip V1.1.2: FFFTech/FFFTechnology
A basic stubby foregrip that attaches to a 5+ slotted section of picatinny rail. Two versions of the design are available; Standard (Smooth Grip) & Rib'd (Fo yo pleasure, baby)
Remember, it may be stubby, but it has so much potential. :P
(Insert cringe here.)
Update V1.1.2: Enlarged picatinny rail channel for better fitment, organized files to current 3FTech data pack format, changed print settings for the common used Ender 3 3D printers.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%
No support material is needed.
Hardware Needed:
1x M5x30 Hex Socketed Machine Screw/Bolt
1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)
creator
Metrics
Views
5.8K
files
| File | Extension |
|---|---|
| Stubbin Foregrip V1.2.2.zip | zip |
versions
Version: Stubbin Foregrip V1.2.2 latest
Stubbin Foregrip V1.2.2: FFFTech/FFFTechnology
A basic stubby foregrip that attaches to a 5+ slotted section of picatinny rail. Two versions of the design are available; Standard (Smooth Grip) & Rib'd (Fo yo pleasure, baby)
Remember, it may be stubby, but it has so much potential. :P (Insert cringe here.)
Update V1.2.2: Fixed void(s) in STL mesh.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%
No support material is needed.
Hardware Needed:
1x M5x30 Hex Socketed Machine Screw/Bolt
1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)
Version: 1.0.0
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
