Stubbins M-Lok VFG: Laffs Dynamics
The original Stubbins VFG, ported to the M-Lok Rail Interface format. Same feel in the hand as the original.
Comes in two variants:
*Basic
*Ridged
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm+
Wall Thickness: .40mm
Wall Perimeters: 5+
Infill: 25%
Support Material Percentage: 18%
Hardware Needed:
1x M5x10 Hex Socketed Machine Screw/Bolt
1x M-Lok T-Nut (Be sure both bolt & nut are the same thread pitch.)
Accreditations:
ProSpaceDog: Requested the Stubbins VFG be ported to the M-Lok Rail Interface format.
File | Extension |
---|---|
Stubbins M-Lok VFG.zip | zip |
Version: 1.0.0 latest
Initial release
Stubbins M-Lok VFG: Laffs Dynamics
The original Stubbins VFG, ported to the M-Lok Rail Interface format. Same feel in the hand as the original.
Comes in two variants:
*Basic
*Ridged
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm+
Wall Thickness: .40mm
Wall Perimeters: 5+
Infill: 25%
Support Material Percentage: 18%
Hardware Needed:
1x M5x10 Hex Socketed Machine Screw/Bolt
1x M-Lok T-Nut (Be sure both bolt & nut are the same thread pitch.)
Accreditations:
ProSpaceDog: Requested the Stubbins VFG be ported to the M-Lok Rail Interface format.
1.6K
207
Sep 29, 2022
3D Printer
United States
English
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International
File | Extension |
---|---|
Stubbins M-Lok VFG.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.