The S96S is an open source inverted feed rifle that uses many commercially available AR15 parts, and is based on the original bolt together 3d printable ar lower. It is made to resemble the magazine fed LMG configuration of the Stoner 63. The complete upper reciever requires no permanant modification. The modified FCG is housed in the top component, and the trigger and grip clamp to the picatinny rail.
The name is based on Eugene Stoners proposed name for the Stoner 63. The M69W does not correlate to the year, but reads M69W still when the reciever is upside down.
This is still a work in progress and additional parts will be made for this. To come soon:
-Spade grips for bufferless uppers
-Longer handguard
-Stoner 63 inspired triangular rear sight cover for standard sights
-Integrated offset sights
-AR180 inspired lower
File | Extension |
---|---|
S96S render with mock upper.png | png |
S96S trigger.stl | stl |
S96S trigger guard.stl | stl |
S96S trigger clamp.stl | stl |
S96S top cover.stl | stl |
S96S straight trigger linkage for right ejection.stl | stl |
S96S reciever open side.stl | stl |
S96S center and mag catch side reciever half.stl | stl |
S96S buffer.stl | stl |
S96S Trigger linkage Final.stl | stl |
S96S Sight offset arm.stl | stl |
S96S Safety.stl | stl |
S96S Magwell latch side.stl | stl |
S96S Magwell Button side.stl | stl |
S96S Handguard, solid. 40mm width inside, 150mm length.stl | stl |
S96S Handguard, solid. 40mm width inside, 150mm length, 80x35mm hole.stl | stl |
S96S Grip.stl | stl |
S96S Grip clamp.stl | stl |
S96 Front magwell.stl | stl |
Version: 1.0.0 latest
The S96S is an open source inverted feed rifle that uses many commercially available AR15 parts, and is based on the original bolt together 3d printable ar lower. It is made to resemble the magazine fed LMG configuration of the Stoner 63. The complete upper reciever requires no permanant modification. The modified FCG is housed in the top component, and the trigger and grip clamp to the picatinny rail.
The name is based on Eugene Stoners proposed name for the Stoner 63. The M69W does not correlate to the year, but reads M69W still when the reciever is upside down.
This is still a work in progress and additional parts will be made for this. To come soon:
-Spade grips for bufferless uppers
-Longer handguard
-Stoner 63 inspired triangular rear sight cover for standard sights
-Integrated offset sights
-AR180 inspired lower
9.7K
632
Jul 24, 2021
United States
English
Creative Commons Attribution-NonCommercial 4.0 International
QmVvzrmb7Zi8ergq3jLeMGzNGKipe7tuuUfioBsi8iYY9Z
File | Extension |
---|---|
S96S render with mock upper.png | png |
S96S trigger.stl | stl |
S96S trigger guard.stl | stl |
S96S trigger clamp.stl | stl |
S96S top cover.stl | stl |
S96S straight trigger linkage for right ejection.stl | stl |
S96S reciever open side.stl | stl |
S96S center and mag catch side reciever half.stl | stl |
S96S buffer.stl | stl |
S96S Trigger linkage Final.stl | stl |
S96S Sight offset arm.stl | stl |
S96S Safety.stl | stl |
S96S Magwell latch side.stl | stl |
S96S Magwell Button side.stl | stl |
S96S Handguard, solid. 40mm width inside, 150mm length.stl | stl |
S96S Handguard, solid. 40mm width inside, 150mm length, 80x35mm hole.stl | stl |
S96S Grip.stl | stl |
S96S Grip clamp.stl | stl |
S96 Front magwell.stl | stl |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.