This jig is designed to be used with the FMDA SD9 frame. Use this jig to cut 3/4in, 1/16in thick aluminum angle to size. Simply just inesrt the angle aluminum and cut flush to jig and drill the hole with a 1/8in (3mm) drill bit.
File | Extension |
---|---|
Front jig SD9.stl | stl |
Version: 1.0.0 latest
Initial release
This jig is designed to be used with the FMDA SD9 frame. Use this jig to cut 3/4in, 1/16in thick aluminum angle to size. Simply just inesrt the angle aluminum and cut flush to jig and drill the hole with a 1/8in (3mm) drill bit.
2.3K
217
Apr 01, 2022
3D Printer
United States
English
No license
QmdXye9GyVMjLBA6dE2FGo2CNGKo4rqfA9mWJ3RbWAcCMQ
File | Extension |
---|---|
Front jig SD9.stl | stl |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.