The Sudy 23/52 release packs are PPS-43 receivers you can build in Semi Automatic using an AR-15 FCG, or Fully Automatic using the original Bolt and FCG.
3D Printed PPS 43/52 Receiver
Updated 4/16/23 One piece models added, internal length shortened in rear
SUDY 23 3D printable PPS43 receiver
UPDATED 3/3/23 Polish markings added
UPDATED 3/4/23 Receiver dimensions fixed to close rear gap to lower. Buffer stl added. Updated instructions
UPDATED 3/5/23 Changed hardware list. 6mm washers instead of 1/4". 6mm washers have correct O.D.
UPDATED 3/8/23 Remixed Captainbarred's AR FCG trigger pocket to use #6-32 screws. Longer handguards added.
UPDATED 4/16/23 One piece models added, Polish markings changed to "(11) wz. 23"
File | Extension |
---|---|
Sudy 23 52 Release Pack.zip | zip |
Version: 1.0.0 latest
initial upload
The Sudy 23/52 release packs are PPS-43 receivers you can build in Semi Automatic using an AR-15 FCG, or Fully Automatic using the original Bolt and FCG.
3D Printed PPS 43/52 Receiver
Updated 4/16/23 One piece models added, internal length shortened in rear
SUDY 23 3D printable PPS43 receiver
UPDATED 3/3/23 Polish markings added
UPDATED 3/4/23 Receiver dimensions fixed to close rear gap to lower. Buffer stl added. Updated instructions
UPDATED 3/5/23 Changed hardware list. 6mm washers instead of 1/4". 6mm washers have correct O.D.
UPDATED 3/8/23 Remixed Captainbarred's AR FCG trigger pocket to use #6-32 screws. Longer handguards added.
UPDATED 4/16/23 One piece models added, Polish markings changed to "(11) wz. 23"
5.4K
334
Jul 11, 2023
Primarily Printable, Hybrid, Printable Lower / Frame
3D Printer
United States
English
No license
File | Extension |
---|---|
Sudy 23 52 Release Pack.zip | zip |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.