Tidal Wave M-Lok AFG V1.0.1: FFFTech/FFFTechnology
A basic curved angled foregrip with a handstop towards the front. Has deep ridging along the curved section.
Update: Changed header title to include "M-Lok".
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 4 - 5
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 26%
Print the AFG upside down.
Hardware Needed:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
File | Extension |
---|---|
Tidal Wave AFG V1.0.1.zip | zip |
Version: 1.0.0 latest
Tidal Wave M-Lok AFG V1.0.1: FFFTech/FFFTechnology
A basic curved angled foregrip with a handstop towards the front. Has deep ridging along the curved section.
Update: Changed header title to include "M-Lok".
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 4 - 5
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 26%
Print the AFG upside down.
Hardware Needed:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
4.9K
Apr 17, 2022
United States
English
QmS74PTxo1gmzkiyXzM9Yy224nxSEBK8DfSiCYkJrPCeAA
File | Extension |
---|---|
Tidal Wave AFG V1.0.1.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.