T&P AKM Enhanced Grip | "Agitator" Model
about
T&P AKM Enhanced Grip | "Agitator" Model
An enhanced grip for the AKM platform, it features an aggressive palm swell, a 70° angle from horizontal, beavertail socket, inset sides, and ridges along the front and back. The grip is symmetrical and will function fine for right or left handed shooting. You will need an AK grip bolt to mount this to your firearm.
Version 1.2 is the standard grip, but if you find that it doesn't mount up as tightly to your AK as you'd like, build the 12mm version. It has narrower mounting dimensions.
Recommended printing settings:
- Material: eSun PLA+ or Polymaker PolyLite PLA Pro
- Nozzle temp: 220°C
- Bed temp: 55°C
- Layer height: 0.16-0.18mm
- Infill: Zigzag, 25-35%
- Walls: 4-6+
- Supports: On
files
| File | Extension |
|---|---|
| AKM_EnhancedGrip_Agitator_12mm.stl | stl |
| AKM_EnhancedGrip_Agitator_12mm.step | unknown |
| AKM_EnhancedGrip_Agitator_v1.2.stl | stl |
| AKM_EnhancedGrip_Agitator_v1.2.step | step |
versions
Version: v1.2 latest
Updated geometry for better mounting fitment.
Version: 1.0.0
Initial release
about
T&P AKM Enhanced Grip | "Agitator" Model
An enhanced grip for the AKM platform, it features an aggressive palm swell, a 70° angle from horizontal, beavertail socket, inset sides, and ridges along the front and back. The grip is symmetrical and will function fine for right or left handed shooting. You will need an AK grip bolt to mount this to your firearm.
Version 1.2 is the standard grip, but if you find that it doesn't mount up as tightly to your AK as you'd like, build the 12mm version. It has narrower mounting dimensions.
Recommended printing settings:
- Material: eSun PLA+ or Polymaker PolyLite PLA Pro
- Nozzle temp: 220°C
- Bed temp: 55°C
- Layer height: 0.16-0.18mm
- Infill: Zigzag, 25-35%
- Walls: 4-6+
- Supports: On
creator
Metrics
Views
1.6K
Downloads
102
Project Info
release date
Oct 28, 2022
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
files
| File | Extension |
|---|---|
| AKM_EnhancedGrip_Agitator_12mm.stl | stl |
| AKM_EnhancedGrip_Agitator_12mm.step | unknown |
| AKM_EnhancedGrip_Agitator_v1.2.stl | stl |
| AKM_EnhancedGrip_Agitator_v1.2.step | step |
versions
Version: v1.2 latest
Updated geometry for better mounting fitment.
Version: 1.0.0
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
