T&P Disposable Defense Series | "Trespass" Model
about
T&P Disposable Defense Series | "Trespass" Model
As a mid-sized tanto knife, the Trespass is intended to be printed in one go and disposed of upon use. It features a non-serrated tanto-style blade, an aggressive grip, finger guard, lanyard loop, and a monolithic polymer body for concealment against metal detectors. Suitable concealment positions would be along the thigh, upper arm (under a longsleeve shirt), and the interior of a boot.
Also included is a training knife version, with blunted point and edges. Applicable in practice scenarios.
Blade length: 5"
Blade width: 0.29"
Total length: 9.85"
Grip width: 0.45"
Recommended printing settings:
- Material: eSun PLA+ or Polymaker PolyLite PLA Pro
- Nozzle temp: 220°C
- Bed temp: 55°C
- Layer height: 0.20mm
- Infill: Solid
- Walls: 4+
- Supports: On
- Orientation: Along the spine, or along the flank
files
| File | Extension |
|---|---|
| Training_Tanto_5in.stl | stl |
| Training_Tanto_5in.step | step |
| DisposableDefense_Tanto_5in.stl | stl |
| DisposableDefense_Tanto_5in.step | step |
versions
Version: 1.0.0 latest
Initial release
about
T&P Disposable Defense Series | "Trespass" Model
As a mid-sized tanto knife, the Trespass is intended to be printed in one go and disposed of upon use. It features a non-serrated tanto-style blade, an aggressive grip, finger guard, lanyard loop, and a monolithic polymer body for concealment against metal detectors. Suitable concealment positions would be along the thigh, upper arm (under a longsleeve shirt), and the interior of a boot.
Also included is a training knife version, with blunted point and edges. Applicable in practice scenarios.
Blade length: 5"
Blade width: 0.29"
Total length: 9.85"
Grip width: 0.45"
Recommended printing settings:
- Material: eSun PLA+ or Polymaker PolyLite PLA Pro
- Nozzle temp: 220°C
- Bed temp: 55°C
- Layer height: 0.20mm
- Infill: Solid
- Walls: 4+
- Supports: On
- Orientation: Along the spine, or along the flank
creator
Metrics
Views
3.3K
Downloads
350
Project Info
release date
Jan 31, 2023
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
files
| File | Extension |
|---|---|
| Training_Tanto_5in.stl | stl |
| Training_Tanto_5in.step | step |
| DisposableDefense_Tanto_5in.stl | stl |
| DisposableDefense_Tanto_5in.step | step |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
