Übertechnik Grip (AR-15)
about
Übertechnik Grip V1.1 (AR-15): FFFTech/FFFTechnology
A grip that utilizes the palm pad on the Balance Mini Grip, but has been relocated to the front section, and has been split into two separate pads. Has rounded backstrap with a straight front section.
Update V1.1: Removed 1.6mm radius material, and 1.5mm height material from the rear tang.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4-5
Infill: 25%
Infill Pattern: Gyroid
Support Material Percentage: 18% (Use tree supports; only needed for the top/rear of the grip.)
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
files
| File | Extension |
|---|---|
| Übertechnik Grip.zip | zip |
versions
Version: 1.0.0 latest
about
Übertechnik Grip V1.1 (AR-15): FFFTech/FFFTechnology
A grip that utilizes the palm pad on the Balance Mini Grip, but has been relocated to the front section, and has been split into two separate pads. Has rounded backstrap with a straight front section.
Update V1.1: Removed 1.6mm radius material, and 1.5mm height material from the rear tang.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4-5
Infill: 25%
Infill Pattern: Gyroid
Support Material Percentage: 18% (Use tree supports; only needed for the top/rear of the grip.)
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
creator
Metrics
Views
4.4K
Project Info
release date
Dec 21, 2021
artifact type
library category
fabrication method
release country
United States
language
English
license
version hash
QmaNDWGBt4zEHKjvcW9eurgeBhmNoxDTrtcvNQLHv6g2hu
files
| File | Extension |
|---|---|
| Übertechnik Grip.zip | zip |
versions
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
