Unity PCC Lower Receiver: Laffs Dynamics
A 3DP PCC lower reciever designed for compatibility between the FGC-9 weapons platform and the Partisan 9. Drop in replacement for their original lower receivers.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Perimeters: 8+
Infill: 80%+
Support Material Percentage: 18%
Notes:
This file pack is for the receiver only. Other printed part files will need to be downloaded from the base design release;
links provided in the below text.
Base FGC-9 MK2 & Partisan 9 files can be found on Odysee:
Partisan-9: https://odysee.com/@TheGatalog-HybridDesigns:0/Partisan-9_Release-v1.0:7
FGC-9 MK2: https://odysee.com/@TheGatalog-HybridDesigns:0/FGC-9_MkII_Rev1:f
(Other print settings and the hardware list will be provided in the base data packs)
Parts Kits for the FGC-9 platform can be found here: https://www.fgckits.com/
Accreditations:
JStark1809, IvanTheTroll, 3socksandcrocs; Creators of the FGC-9.
ImmortalRevolt: Creator of the Partisan-9.
Dogenado: Gave info on a parts kit vendor.
DreadPirateRoberts, Dr.Death, GW-DD: Provided moral support, showed the initial design to them.
File | Extension |
---|---|
Unity 3DP PCC Lower.zip | zip |
Version: 1.0.0 latest
initial upload
Unity PCC Lower Receiver: Laffs Dynamics
A 3DP PCC lower reciever designed for compatibility between the FGC-9 weapons platform and the Partisan 9. Drop in replacement for their original lower receivers.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Perimeters: 8+
Infill: 80%+
Support Material Percentage: 18%
Notes:
This file pack is for the receiver only. Other printed part files will need to be downloaded from the base design release;
links provided in the below text.
Base FGC-9 MK2 & Partisan 9 files can be found on Odysee:
Partisan-9: https://odysee.com/@TheGatalog-HybridDesigns:0/Partisan-9_Release-v1.0:7
FGC-9 MK2: https://odysee.com/@TheGatalog-HybridDesigns:0/FGC-9_MkII_Rev1:f
(Other print settings and the hardware list will be provided in the base data packs)
Parts Kits for the FGC-9 platform can be found here: https://www.fgckits.com/
Accreditations:
JStark1809, IvanTheTroll, 3socksandcrocs; Creators of the FGC-9.
ImmortalRevolt: Creator of the Partisan-9.
Dogenado: Gave info on a parts kit vendor.
DreadPirateRoberts, Dr.Death, GW-DD: Provided moral support, showed the initial design to them.
2.1K
222
Aug 09, 2023
CAD Object, Stereolithic object, Printable project
Primarily Printable, Hybrid, Printable Lower / Frame
United States
English
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
File | Extension |
---|---|
Unity 3DP PCC Lower.zip | zip |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.