BOM

 - 4x M5x30 SHCS's

 - 4x M5 Nuts

 - 1x M3x40 SHCS

 - 1x M3x20 SHCS

 - 2x M3 Nuts

 - 1x AR-15 Buffer Detent Spring

Front Sight Assembly

1 - Install Front Sight Frame on rail with 2x M5 nuts and bolts

2 - Insert AR-15 buffer detent spring into top cavity, followed by placing the Front Sight Post on top of it

3 - Place an M3 nut inside the Front Sight Adjustment Knob, with the nut facing down, and slide the knob into the side cavity of the frame

4 - Secure Front sight Post to Adjustment Knob with M3x20 SHCS

(5) - Adjust height as needed with knob for mechanical offset or bullet drop as-needed

Rear Sight Assembly

1 - Install Rear Sight Frame on rail with 2x M5 nuts and bolts

2 - Place Front Sight Optic pillar in between posts on frame with text facing away from muzzle

3 - Screw in the Front Sight Adjustment Knob through the frame and optic (either side)

4 - Mate adjustment knob with Front Sight Knob Cap, adhere with M3x40 SHCS and M3 nut