V1-PR Handguard (MP5K): Laffs Dynamics
Filament Recommended: Glass Filled Nylon, Carbon Fiber Nylon
Print Settings:
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 75%+
Support Material Percentage: 20%
Print the mount on it's rear face.
File | Extension |
---|---|
HG-1-PR (MP5K).zip | zip |
Version: HG-1-PR Handguard (MP5K) latest
HG-1-PR Handguard (MP5K): Laffs Dynamics
Filament Recommended: Glass Filled Nylon, Carbon Fiber Nylon
Print Settings:
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 75%+
Support Material Percentage: 20%
Print the mount on it's rear face.
Version: 1.0.0
initial upload
V1-PR Handguard (MP5K): Laffs Dynamics
Filament Recommended: Glass Filled Nylon, Carbon Fiber Nylon
Print Settings:
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 75%+
Support Material Percentage: 20%
Print the mount on it's rear face.
1.3K
186
Sep 27, 2023
Stereolithic object, Printable project
3D Printer
United States
English
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
File | Extension |
---|---|
HG-1-PR (MP5K).zip | zip |
Version: HG-1-PR Handguard (MP5K) latest
HG-1-PR Handguard (MP5K): Laffs Dynamics
Filament Recommended: Glass Filled Nylon, Carbon Fiber Nylon
Print Settings:
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 75%+
Support Material Percentage: 20%
Print the mount on it's rear face.
Version: 1.0.0
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.