VertiGrip (AR-15): FFFTech/FFFTechnology
A 0° angled grip designed typically for precision rifles. Has a rear palm swell for comfort, and has an overall length of ~116mm to fit even the largest of hands.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4-5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18% (Use tree supports; only needed for the top/front of the grip.)
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
File | Extension |
---|---|
VertiGrip.zip | zip |
Version: 1.0.0 latest
VertiGrip (AR-15): FFFTech/FFFTechnology
A 0° angled grip designed typically for precision rifles. Has a rear palm swell for comfort, and has an overall length of ~116mm to fit even the largest of hands.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4-5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18% (Use tree supports; only needed for the top/front of the grip.)
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
2K
Sep 16, 2021
United States
English
Qmf1Jf3HBjqNFTBAD9s3nNSWqLgeiNPGm3o59zq6BYLWRL
File | Extension |
---|---|
VertiGrip.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.