Vulpes Grip (AR-15): FFFTech/FFFTechnology One of the smallest of my Mini Grip Series. Designed to be the most compact of the series, while still allowing (most) users to get all four fingers on the grip. Extremely lightweight. Due to how compact this grip is, it's base model is ridged down the front. (Normally the base model of my grip designs have no texture.) Printer Used: Monoprice Maker Select Plus Filament Used: PLA+ Print Settings: Extruder: 218C Bed: 56C First Layer Print Height: .20mm Standard Layer Height: .14mm Wall Thickness: .40 Wall Perimeters: 4-5 Infill: 30% Infill Pattern: Gyroid Material Flow: 100% Hardware Needed: 1x Allen Head Screw, 1/4-28 x 1" 1x Steel Star Washer 1x Safety Selector Detent Pin 1x Safety Selector Detent Spring
File | Extension |
---|---|
Vulpes Grip.zip | zip |
Version: 1.0.0 latest
Vulpes Grip (AR-15): FFFTech/FFFTechnology One of the smallest of my Mini Grip Series. Designed to be the most compact of the series, while still allowing (most) users to get all four fingers on the grip. Extremely lightweight. Due to how compact this grip is, it's base model is ridged down the front. (Normally the base model of my grip designs have no texture.) Printer Used: Monoprice Maker Select Plus Filament Used: PLA+ Print Settings: Extruder: 218C Bed: 56C First Layer Print Height: .20mm Standard Layer Height: .14mm Wall Thickness: .40 Wall Perimeters: 4-5 Infill: 30% Infill Pattern: Gyroid Material Flow: 100% Hardware Needed: 1x Allen Head Screw, 1/4-28 x 1" 1x Steel Star Washer 1x Safety Selector Detent Pin 1x Safety Selector Detent Spring
1.9K
Nov 05, 2021
United States
English
QmTjYkx3TpVCfe8L7YHzkNcVxxNMPvVdXp1rhVYaYuTwuv
File | Extension |
---|---|
Vulpes Grip.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.