The Snarks Walther P22 Magazine.

Really not a lot to say about this one.

I got a new to me Walther P22, and I really love the damn thing. However, when I went to go buy an

extra magazine for it, the cheapest one I could find was $39.95, (I'm seeing that you can get them as low

as about $30 on eBay right now.) But I’ve got a 3D printer and a pair of calipers, and I’ve seen people do

CAD stuff before.

I had extra magazine springs from another project that worked out really well. I bought them from this

place. https://www.blackdogmachinellc.net/ciener-replacement-recoil-spring.aspx

I cut mine so that about four coils were hanging out of the end of the magazine, you may be able to use

a little bit less spring, I didn’t really put a lot of thought into it. I’m pretty sure the original only had three

coils hanging out the end. Anyway, if you buy those long springs I linked up there you can almost get

three mags worth out of one spring, which works out to like $0.50 per mag.

“Good luck, be safe, keep hope, and have fun” – The Snark