This is a redesign of my VPNVG-4 with an extremely smaller profile and much thinner walls.
I have not yet printed this file as i literally just finished designing it.
I recommend you use max walls at .16 layer height for this as the walls are very thin in some areas.
i posted some videos on tiktok showing how they look on the inside and how to wire them
What to print
Optionally if you dont want to spend $50-100 on a PVS-14 mount you can Print of the janky homemade one that is actually just two go pro mounts connected with some bars
This design allows for 5MM IR leds to be put in the cap i have yet to figure out how to make them work but will keep you posted if i figure it out.
File | Extension |
---|---|
images/buffer.png | png |
images/Sensor_capNO_LEDs.png | png |
images/Sensor_cap.png | png |
images/Locking_plate.png | png |
images/Lense_retainer.png | png |
images/Capture.PNG | PNG |
images/Bridge.png | png |
images/Body.png | png |
files/buffer.stl | stl |
files/Sensor_capNO_LEDs.stl | stl |
files/Sensor_cap.stl | stl |
files/Locking_plate.stl | stl |
files/Lense_retainer.stl | stl |
files/Gopro_mount_bridge_v2.3mf | 3mf |
files/Bridge.stl | stl |
files/Body.stl | stl |
README.txt | txt |
LICENSE.txt | txt |
Version: 1.0.0 latest
Initial release
This is a redesign of my VPNVG-4 with an extremely smaller profile and much thinner walls.
I have not yet printed this file as i literally just finished designing it.
I recommend you use max walls at .16 layer height for this as the walls are very thin in some areas.
i posted some videos on tiktok showing how they look on the inside and how to wire them
What to print
Optionally if you dont want to spend $50-100 on a PVS-14 mount you can Print of the janky homemade one that is actually just two go pro mounts connected with some bars
This design allows for 5MM IR leds to be put in the cap i have yet to figure out how to make them work but will keep you posted if i figure it out.
3K
Dec 19, 2021
3D Printer
United States
English
No license
QmUiK5wRUZyrU869d5RDcwmuAuv45dFQjTo7YTkkLudAwk
File | Extension |
---|---|
images/buffer.png | png |
images/Sensor_capNO_LEDs.png | png |
images/Sensor_cap.png | png |
images/Locking_plate.png | png |
images/Lense_retainer.png | png |
images/Capture.PNG | PNG |
images/Bridge.png | png |
images/Body.png | png |
files/buffer.stl | stl |
files/Sensor_capNO_LEDs.stl | stl |
files/Sensor_cap.stl | stl |
files/Locking_plate.stl | stl |
files/Lense_retainer.stl | stl |
files/Gopro_mount_bridge_v2.3mf | 3mf |
files/Bridge.stl | stl |
files/Body.stl | stl |
README.txt | txt |
LICENSE.txt | txt |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.