THIS DOCUMENT CONTAINS VERY IMPORTANT INFORMATION REGARDING YOUR RIGHTS AND OBLIGATIONS, AS WELL AS CONDITIONS, LIMITATIONS, AND EXCLUSIONS THAT MIGHT APPLY TO YOU. PLEASE READ IT CAREFULLY.
To use defcad.com (“DEFCAD”), you must be at least 21 years old. If you are age 20 or younger, use of this site is strictly prohibited.
GENERAL PROHIBITION AGAINST ACCESS BY CERTAIN USERS
Notwithstanding any other part of these Terms of Service, and notwithstanding any other express or implied grant of permission, the following persons/entities are expressly forbidden from using, accessing, or obtaining any information from DEFCAD for any reason:
Federal and state law enforcement agencies operating within or under the authority of the states of New Jersey, New York, Connecticut, Pennsylvania, and Washington. Agents of the offices of the Attorneys General of New Jersey, New York, Connecticut, Pennsylvania and Washington. Agents of the offices of Consumer Affairs or Consumer Protection in the states of New Jersey, New York, Connecticut, Pennsylvania, and Washington.
Employees, agents, members and associates of the gun control organizations including but not limited to: Brady, Giffords, Everytown for Gun Safety, Mom's Demand Action, Newtown Action Alliance, Sandy Hook Promise, The Trace, and The United Methodist Church. Attorneys, employees, agents and associates of the law firms represented by the FACT coalition, including but not limited to the firms: Arnold & Porter LLP, Bilzin Sumberg Baena Price & Axelrod LLP, Cooley LLP, Covington & Burling LLP, Dentons USLLP, Gibson Dunn And Crutcher LLP, Hogan Lovells US LLP, Keker, Van Nest & Peters LLP, Mayer Brown LLP, Morrison & Foerster LLP, Morvillo Abramowitz Grand Iason & Anello PC, Munger Tolles & Olson LLP, O’Melveny & Myers LLP, Paul, Weiss, Rifkind, Wharton & Garrison LLP, and Simpson Thacher & Bartlett LLP. Attorneys, employees, agents and associates of the law firms Venable, LLP and Keker, Van Nest & Peters.
Any access or use of any part of DEFCAD, whether directly or indirectly, by or at the direction of, any of the above-listed persons is expressly forbidden and is unlawful. Any violation of this prohibition may lead to civil and/or criminal liability pursuant to the Computer Fraud and Abuse Act, 18 U.S.C. § 1030 (the “CFAA”).
This prohibition is intended to clarify that no permission to access is granted to any of the above-listed users. Further, for avoidance of doubt, this prohibition is intended to immediately and permanently revoke any pre-existing express or implied grant of permission to access this site within the meaning of Facebook, Inc v. Power Ventures, Inc, 844 F.3d 1058 (9th Cir. 2016) (noting, “a defendant can run afoul of the CFAA when he or she has no permission to access a computer or when such permission has been revoked explicitly.”) (emphasis added).
By accessing this site, you agree to the following terms:
DEFCAD is an online information library and CAD model marketplace. We are dedicated to the advancement of, and education concerning, American gunsmithing, and the protection of the Second Amendment. Users, professionals and amateurs alike, are invited to access this site in order to learn more about these topics and to contribute to the online discussion.
Users may also purchase and share small arms technical data from this site subject to our Purchase Terms and subject to any and all legal requirements imposed by local, state or federal law.
By uploading/downloading/viewing any CAD models appearing on this site, you understand and agree that all such models are, unless otherwise expressly stated, not created nor materially modified by DEFCAD. As such, CAD models appearing on this site are “information provided by another information content provider” within the meaning of 47 U.S.C. § 230(c)(1).
You understand and agree DEFCAD is not responsible for the accuracy of such models. As explained further herein, DEFCAD does not warrant that such models are suitable or fit for any particular purpose. DEFCAD is not liable for the use of such models by third parties, and cannot be treated as the publisher or speaker of such models or any advertisements offering such models for sale. See, e.g., Gibson v. Craigslist, 2009 WL 1704355, *3 (S.D.N.Y. 2009) (explaining that under federal law, specifically 47 U.S.C. § 230(c)(1), “‘[n]o provider or user of an interactive computer service shall be treated as a publisher or speaker of any information provided by another information content provider,’ and that ‘[n]o cause of action may be brought and liability may be imposed under any State or local law that is inconsistent with this section.”)
By using, uploading and/or downloading information from DEFCAD, you represent that you understand and agree to comply with all local, state and/or federal laws governing your purchase, possession, and/or use of CAD models appearing on DEFCAD, or any physical parts created from such models. Your use of DEFCAD is subject to various United States and international laws, including but not limited to the Export Administration Regulations (EAR) and the International Traffic in Arms Regulations (ITAR).
You further represent and declare (or certify, verify, or state) that each of the following are true and correct under penalty of perjury pursuant to 28 U.S.C. § 1746:
Provided you meet all of the above requirements, the use of DEFCAD is free to anyone except for those persons/agencies indentified in the GENERAL PROHIBITION listed above. However, DEFCAD is not currently accepting or fulfilling orders from foreign persons, as defined at 22 CFR § 120.16 and 15 CFR § 772.1, or individuals behind the Blue Wall
Your use of DEFCAD is subject to various United States and international laws, including but not limited to the Export Administration Regulations (EAR) and the International Traffic in Arms Regulations (ITAR). By uploading any materials, you agree to comply with all domestic and international laws that apply to export-controlled information and software. In furtherance of these restrictions, you certify and/or represent and warrant the following regarding the files being submitted to DEFCAD for publication by DEFCAD, Inc.:
Contributor Certificate of Origin Version 1.0
By making a contribution to DEFCAD, I certify that:
By uploading any material to DEFCAD, including but not limited to CAD models, you grant to DEFCAD an irrevocable, perpetual, fully-paid, worldwide non-exclusive license to use, copy, perform, display and distribute such information and content and to prepare derivative works of, or incorporate into other works, such information and content, and to grant and authorize sublicenses of the foregoing.
You represent and warrant that any content you submit is an original work by you, that you own or control 100% of the rights in and to your content and the rights granted to DEFCAD in this license, and such rights are and shall be free and clear of any and all claims, rights and obligations; and that you have the right to grant to DEFCAD the rights granted to us in this license, you do not require the consent of any third party and that there is no contract with any third party that could in any way interfere with DEFCAD’s rights under this license or require any payment to be made to anyone by DEFCAD.
You acknowledge and agree that:
DEFCAD complies with the safe harbor provisions of the Digital Millennium Copyright Act, 17 U.S.C. § 512 (the "DMCA"). Upon receipt of a valid Notification of Claimed Infringement, we will promptly remove any infringing content and will, under appropriate circumstances, terminate the privileges of any user who uses DEFCAD to unlawfully infringe copyrighted material without a license, express consent, valid defense or fair use exemption to do so.
If you believe that your copyrighted work has been infringed by any content appearing on DEFCAD, please let us know by submitting a written notice that contains all of the following information:
Any Notification of Claimed Infringement or other complaint regarding copyrighted material appearing on DEFCAD must be submitted, in writing, to our designated DMCA agent:
Cody R Wilson
1101 W 34th St. #340
Austin, TX 78705
Email: [email protected]
Repeat infringer policy: This site takes copyright law seriously. In addition to removing infringing content when appropriate, we will block access to the site by any user who we determine to be a repeat infringer. For the purposes of this policy, a “repeat infringer” is defined as any person who is deemed to have uploaded infringing content three (3) or more times within a period of six (6) months.
We will not be liable or responsible to you, nor be deemed to have defaulted or breached these Terms, for any failure or delay in our performance under these Terms when and to the extent such failure or delay is caused by or results from acts or circumstances beyond our reasonable control, including, without limitation, acts of God, flood, fire, earthquake, explosion, governmental actions, war, invasion or hostilities (whether war is declared or not), terrorist threats or acts, riot or other civil unrest, national emergency, revolution, insurrection, epidemic, lockouts, strikes or other labor disputes (whether or not relating to our workforce), or restraints or delays affecting carriers or inability or delay in obtaining supplies of adequate or suitable materials, materials or telecommunication breakdown or power outage.
All matters arising out of or relating to these Terms are governed by and construed in accordance with the internal laws of the State of Arkansas without giving effect to any choice or conflict of law provision or rule that would cause the application of the laws of any jurisdiction other than those of the State of Arkansas.
ANY CLAIM, DISPUTE OR CONTROVERSY ARISING FROM OR RELATED IN ANY WAY TO THESE TERMS OR ANY PROVISIONS HEREIN SHALL BE RESOLVED BY BINDING ARBITRATION. UNLESS BOTH PARTIES AGREE OTHERWISE, AND REGARDLESS OF THE AMOUNT N DISPUTE, THE PARTIES EXPRESSLY AGREE THE ARBITRATION SHALL BE CONDUCTED BY THE AMERICAN ARBITRATION ASSOCIATION (“AAA”), IN LITTLE ROCK, ARKANSAS, PURSUANT TO THE AAA’S RULES OF EXPEDITED COMMERCIAL ARBITRATION.
The failure by us to enforce any right or provision of these Terms will not constitute a waiver of future enforcement of that right or provision. The waiver of any right or provision will be effective only if in writing and signed by a duly authorized representative of the Company.
The Second Amendment of the United States Constitution provides: “A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.”
Despite this broad language, there are many different local, state, and federal laws governing and/or limiting the possession, use, and manufacturing of firearms and firearm parts. These laws vary widely from jurisdiction to jurisdiction. Laws also can and frequently do change.
Due to the wide variety of laws that may apply, DEFCAD is unable to provide legal advice, and nothing in these Terms should be interpreted as providing legal advice, to our users regarding their specific rights, duties, and potential legal liabilities. Each user of DEFCAD is solely responsible for ensuring that they understand, and are in full compliance with, all local, state, and federal laws which may apply to their use of this website and/or the possession and/or creation of physical firearm parts using models obtained from this site.
Products and services offered by DEFCAD are provided “AS-IS” and without any warranties, express or implied. Any and all warranties, including implied warranties of merchantability or fitness for a particular purpose, are expressly disclaimed. There are no warranties which extend beyond the description on the face hereof.
You agree to indemnify and hold DEFCAD harmless from any claim, cause of action, demand or damages related to or arising out of: (a) content that you post or transmit via DEFCAD (including but not limited to CAD models, physical parts created therefrom, and any content that a third-party deems defamatory or otherwise harmful or offensive); (b) activity that occurs through or by use of your account (including, without limitation, all content posted or transmitted and your interactions with others); (c) your use of or reliance on any user content; and (d) your violation of these Terms. This indemnification obligation includes payment of any attorneys' fees and costs incurred by DEFCAD. We reserve the right, at our own expense, to assume the exclusive defense and control of any matter otherwise subject to indemnification by you, and you agree to cooperate with our defense of such claims.
These terms constitute a legal agreement between you and DEFCAD. These terms are not intended to be, and shall not be, enforceable by any third party/parties.
If any provision of these Terms is invalid, illegal, void or unenforceable, then that provision will be deemed severed from these Terms and will not affect the validity or enforceability of the remaining provisions of these Terms.
These Terms constitute the entire agreement between you and DEFCAD. These Terms supersede any prior written or oral agreement. If any provision of these Terms is found by a court of competent jurisdiction to be unenforceable, all other provisions remain in full force and effect.
Federal law, specifically 47 U.S.C. § 230(d), requires the provider of an “interactive computer service” (such as a website) to “notify [each] customer that parental control protections (such as computer hardware, software, or filtering services) are commercially available that may assist the customer in limiting access to material that is harmful to minors.”
Pursuant to this requirement, if you are a parent and you are interested in obtaining commercial tools to help you limit access to material that is harmful to minors, you can find a list of such tools here: PCMag.com – The Best Parental Control Software for 2020.
NOTE – DEFCAD has no relationship with either PCMag.com or with any of the software vendors mentioned in this article. We do not endorse or recommend any specific parental control software, product, or service.
DEFCAD is owned and operated by: DEFCAD, Inc., 1 Riverfront Place Suite 415, North Little Rock, AR 72214
TOS v.3.1 Last Updated: November 24, 2020
DEFCAD, Inc. All rights reserved.Habent sua fata libelli et balli
DEFCAD files and other hardware are not currently available to persons outside the United States and are not available to residents of and persons in the State of New Jersey who do not possess a federal firearms license.